Changan Automobile Sales Co., Ltd. Notification Service Unit: Dealers, Distributors, Technical Service Center (2009) Sales No. 352 Validity Period: December 31, 2009 Issue Date: July 14, 2009 Topic: About SC6363 , SC6371 brake hose clamp to check the adjustment of the national Business Departments, distributors, technical service centers: Nanjing Changan recently found some production SC6363, SC6371 vehicle oil pan hose and master pump connector at the presence of brake fluid Leakage, after investigation to determine the cause of the leakage connected to the brake hose and master cylinder stainless steel clamp assembly too tight, resulting in hose damage, cracking caused.
In order to solve such problems promptly, the inspection and adjustment requirements are hereby notified as follows: I. Scope of Inspection 1. From January to June 2009, SC6363 and SC6371 produced by Nanjing Changan Automobile Co., Ltd., 100% inspection of warehouses in the warehouse, and vehicles sold have been returned to the factory for maintenance When inspection as a project to be checked.
Second, the inspection method Observed with a flashlight under the table oil tank hose connector at the head and there is no trace of oil, or by hand touch the oil tank hose and the head of the pump at the joint, if it is found that the oil must be adjusted immediately.
Third, the adjustment process 1, with the appropriate specifications of the "cross" release brake hose and the head of the stainless steel clamp at the joint; 2, the clamp back to the hose and the master cylinder is not in contact; 3, Pinch the hose by hand to prevent a large amount of brake fluid from flowing out of the oil can. 4. Use a pair of scissors to cut off the damaged section of the front end of the brake hose (about 10mm-15mm). 5. Reinsert the processed brake hose Master pump connector connection; 6, with "cross from" tighten the stainless steel clamp.
7, re-brake system to add air brake fluid, check the braking force, and finally the brake fluid level in the two between the graduated mark.
Fourth, the cost of reporting the adjustment costs in accordance with each vehicle 1 working hours settlement, 600001 special operating code in the system to declare.
V. Relevant Requirements 1. Dealers and technical service centers must strictly follow the requirements of the notice and inspect 100% of the vehicles in the warehouse. The vehicles in question must be 100% adjusted to ensure that they can be sold without any problems.
2, in the library vehicle inspection and adjustment of the cost of reporting must be completed by July 20.
3, the project as a project to be seized, back to factory maintenance Nanjing Changan production SC6363, SC6371 must be fully inspected, there are problems must be immediately adjusted.
4, Deputy director of each business unit as the first responsible person for this work, urging distributors in the region to strictly follow the requirements of the notice, completing the relevant work on time; distributors, technical service centers due to the implementation of ineffective adverse consequences will be pursued Division Manage joint and several liability.
Please follow the implementation of the relevant units!
July 09, 2009 Approved by: Xie Fenggao Review: Ma Shunbing Draft: Cao Rui Total 2 pages Use a screwdriver or electric trigger assembly stainless steel clamp